ubiquiti:access_points:update_access_point
Table of Contents
Ubiquiti- Access Points - Update Access Point
Update through the GUI
Navigate to Devices.
Click on the device to update.
Select the Config tab → Manage Device → Custom Upgrade.
Enter a link that points to the new firmware version.
NOTE: Firmware .bin file links can be found on our official Downloads page under the Firmware section, or within the Releases section in the Community pages.
Using SSH
SSH into the Access Point using the username ubnt and password ubnt.
ssh ubnt@192.168.1.18 ubnt@192.168.1.18's password:
Then issue the command:
upgrade https://dl.ui.com/unifi/firmware/U7PG2/4.3.21.11325/BZ.qca956x.v4.3.21.11325.200922.1139.bin
NOTE: The AP will then upgrade and you should be able to adopt it.
Another method
SCP the binary onto the AP from a client, example below:
scp /path/to/fw.bin username@192.168.1.15:/tmp/fwupdate.bin
Then SSH into the AP and run the command below:
syswrapper.sh upgrade2 &
References
ubiquiti/access_points/update_access_point.txt · Last modified: 2022/10/10 21:35 by peter