pfsense:dns:dns_resolver:python_mode
Table of Contents
PFSense - DNS - DNS Resolver - Python Mode
Disable some setting in Unbound DNS Resolver (if you are using that in pfSense)
Navigate to Services → DNS Resolver.
Disable the following options in Unbound Resolver:
- DHCP Registration: Register DHCP leases in the DNS Resolver
- OpenVPN Clients: Register connected OpenVPN clients in the DNS Resolver
NOTE: pfBlockerNG has some checks to make sure that the options above are disabled when you enable python mode but it is strongly advised to disable them before starting to configure pfBlockerNG.
Override some clients from the DNS Blocker
Navigate to Firewall → pfBlockerNG → DNSBL → Python Group Policy.
- Bypass IPs: Add mulitple lines of IP Addresses to bypass.
192.168.50.100 192.168.50.101 192.168.50.102 192.168.50.103 192.168.50.104 192.168.50.105 192.168.50.106 192.168.50.107 192.168.50.108 192.168.50.109 192.168.50.110 ... 192.168.50.199
NOTE: Is the CLEAR network is not using filtering, add all IP addresses from the vlan to bypass.
References
pfsense/dns/dns_resolver/python_mode.txt · Last modified: 2023/11/16 22:41 by peter