====== PFSense - Install pfSense - Configure Interface DHCP ======


===== Configure DHCP for the LAN Interface =====

Navigate to **Services -> DHCP Server**.

Select **LAN** tab and set the DHCP server as follows:

  * Enabled:  **Checked**.
  * Range:
    * From:  **192.168.1.100**.
    * To:  **192.168.1.199**.

<WRAP info>
**NOTE:**  Set each interface to use x.x.x.100-199 for dynamic addresses and reserve x.x.x.10-99 for static allocations.

Depending on the number of devices in your network adjust this to suit your needs.

</WRAP>

{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_lan.png?800|}}

----



===== Configure DHCP for the CLEAR Interface =====

Navigate to **Services -> DHCP Server**.

Select **CLEAR** tab and set the DHCP server as follows:

  * Enabled:  **Checked**.
  * Range:
    * From:  **192.168.50.100**.
    * To:  **192.168.50.199**.

<WRAP info>
**NOTE:**  Set each interface to use x.x.x.100-199 for dynamic addresses and reserve x.x.x.10-99 for static allocations.

Depending on the number of devices in your network adjust this to suit your needs.

</WRAP>

{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_clear.png?800|}}


Configure external DNS providers:

{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_clear_-_servers.png?800|}}

<WRAP info>
**NOTE:**  Change these as required.
</WRAP>


----

===== Configure DHCP for the IOT Interface =====

Navigate to **Services -> DHCP Server**.

Select **IOT** tab and set the DHCP server as follows:

  * Enabled:  **Checked**.
  * Range:
    * From:  **192.168.70.100**.
    * To:  **192.168.70.199**.

<WRAP info>
**NOTE:**  Set each interface to use x.x.x.100-199 for dynamic addresses and reserve x.x.x.10-99 for static allocations.

Depending on the number of devices in your network adjust this to suit your needs.

</WRAP>

{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_iot.png?800|}}

Configure external DNS providers:

{{:pfsense:install_pfsense:pfsense_-_my_configuration_-_services_-_dhcp_server_-_iot_-_servers.png?800|}}

<WRAP info>
**NOTE:**  Change DNS providers as required.
</WRAP>




----

===== Configure DHCP for the GUEST Interface =====

Navigate to **Services -> DHCP Server**.

Select **CLEAR** tab and set the DHCP server as follows:

  * Enabled:  **Checked**.
  * Range:
    * From:  **192.168.99.100**.
    * To:  **192.168.99.199**.

<WRAP info>
**NOTE:**  Set each interface to use x.x.x.100-199 for dynamic addresses and reserve x.x.x.10-99 for static allocations.

Depending on the number of devices in your network adjust this to suit your needs.

</WRAP>

{{:pfsense:install_pfsense:pfsense_-_services_-_dhcp_-_guest.png?800|}}

----

Return to [[PFSense:Install pfSense|Install pfSense]] or continue to [[PFSense:Install pfSense:NTP Configuration|NTP Configuration]].

----