Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Ubiquiti - Login Credentials - Change Login Credentials ======

The Username, Password, and SSH keys can be changed:

  - Log into the UniFi controller.
  - Go to **Settings** - click the gear icon towards the bottom-left of the page.
  - Navigate to the **System** section.
  - Set the desired changes in the **Network Device SSH Authentication** section.
  - Click **Apply Changes**.

<WRAP info>
**NOTE:**  After applying the changes, the adopted access points should automatically update with the new credentials.

  * It is suggested to wait for a few minutes here.

</WRAP>

If the new credentials do not work, then force the changes onto an access point by doing the following:

  - Log into the UniFi controller.
  - Go to **Devices**.
  - Click on an access point that needs updating - this will pop open a panel on the right side of the page.
  - Click the **Settings** icon - it looks like a gear.
  - Click **Manage**.
  - Click **Provision**.

<WRAP info>
**NOTE:**  The status of the access point will change to **Provisioning**.

  * Once the status of the access point has changed back to **Connected**, you should be able to SSH into the access point using the updated credentials.

</WRAP>