Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== PFSense - Upgrade PFSense ======


<WRAP important>
**IMPORTANT:**  Do not upgrade packages until after you have updated pfSense itself.
</WRAP>




----

===== Take a backup =====

Navigate to **Diagnostics -> Backup & Restore**.

  * Click the **Download configuration as XML** button.

{{:pfsense:pfsense_diagnostics_backup.png?800|}}

and ensure that you select **Save** before clicking on OK.

{{:pfsense:pfsense_diagnostics_backup_save.png?600|}}


The file should be save to your Download directory, for example:

<code bash>
config-pfSense.localdomain-20200409161149.xml
</code>

----

===== Prepare a fall back plan =====

Plan for how to recover beforehand.

Write a USB stick to have the latest pfSense image file available on it.

If the upgrade fails for some reason, you could reinstall it from this USB stick, and then just reapply the changes you need.

As an extra step, you could also have a another USB stick written with the current pfSense image file.

This would allow you to revert the system to the existing version if really needed.

----

===== Remove packages =====

It is recommended to remove all packages before upgrading pfSense to a new release. 

Make a note the installed packages, remove them, perform the upgrade, and then reinstall necessary packages.

<WRAP info>
**NOTE:**  Many packages, such as pfBlockerNG have options to remember the configuration you have set, which once you reinstall the package after the upgrade will reset the configuration you had:

{{:pfsense:pfsense_pfblockerng_general_keep_settings.png?800|}}
</WRAP>

----

===== Pre-Upgrade Reboot =====

Reboot before doing any update attempt.

----

===== Perform the Update =====

From the GUI:

Navigate to **System -> Update**.

  * Set **Branch** to Latest stable version.
  * Click on "Confirm".

{{:pfsense:pfsense_system_update.png?800|}}

----

 

==== Update manually (optional) ====

From the console or ssh:

  * Select option 13 OR select option 8

{{:pfsense:pfsense_shell_options.png?800|}}

and run:

<code bash>
pfSense-upgrade
</code>

An alternative method is to use the following commands from the console or shell:

<code bash>
pkg-static clean -ay; pkg-static install -fy pkg pfSense-repo pfSense-upgrade
</code>

Force a reinstall of everything:

<code bash>
pkg-static upgrade -f
</code>

Review the list of changes and enter **y** to proceed.

Manually reboot the firewall.

----

===== Troubleshooting =====

==== Check the update log ====

A log of the last update attempt is located at /conf/upgrade_log.latest.txt.

If the update check fails, or the update does not complete, run the following to ensure that pfSense-upgrade is present.

<code bash>
pkg-static update 
pkg-static upgrade -fy

pkg install -y pfSense-upgrade
</code>

----

Could also try, after choosing Option 8,

<code>
ifconfig
cpsw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 68:9e:19:9c:a6:59
        hwaddr 68:9e:19:9c:a6:59
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
...
</code>

Use the first NIC shown above in the following:

<code bash>
dhclient cpsw0 
pkg-static update 
pkg-static upgrade -fy
</code>

----

===== References =====

https://docs.netgate.com/pfsense/en/latest/install/upgrade-guide.html

https://docs.netgate.com/pfsense/en/latest/install/upgrading-pfsense-software-installations.html

https://docs.netgate.com/pfsense/en/latest/install/upgrade-troubleshooting.html

https://files.pfsense.org/hashes/