Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== BASH - Commands - cut - Cut using Bytes ======

===== Byte Cuts =====

The **b** option provided by the **cut** utility allows us to cut sections of a text-based on their byte positions.

Use the cut command with the flag -b followed by the byte numbers for this purpose.

----

===== Cut a Single Byte from the Input Stream =====

<code bash>
echo "cutting text from input" | cut -b 1
</code>

The above command echoes the string “cutting text from input” to the standard output and pipes it as an input to the cut command.

The cut command will cut just the first byte(c) from this string as only 1 was provided with the -b flag.

----


===== Cut Specific Bytes from the Input Stream =====

<code bash>
echo "cutting text from input" | cut -b 1,3
</code>

This command will only cut the first and third byte of the string “cutting text from input” and will display “ct” as its output.

----

===== Cut a Range of Bytes from the Input Stream =====

<code bash>
echo "cutting text from input" | cut -b 1-12
</code>

The above command will cut the byte range 1-12 from the given string and print out “cutting text” on the standard output.

<WRAP important>
**WARNING:** Providing byte ranges that are outside of the string’s occupation will result in a message showing “cut: invalid byte or character range”.
</WRAP>

----

===== Cut a Single Byte from the Text file =====

<code bash>
cut -b 1 test.txt
</code>

This command will display only the first bytes of each of the five rows inside the file test.txt.

It is equivalent to the command <code bash>cat test.txt | cut -b 1</code>

-----

===== Cut Specific Bytes from a Text File =====

<code bash>
cut -b 1,3 test.txt
</code>

The above command cuts only the first and third bytes of each row.

You can specify any byte numbers as long as they fall within the range of bytes available.

----

===== Cut a Range of Bytes from a Text File =====

<code bash>
cut -b 1-12 test.txt
</code>

This command will output the first one to twelfth bytes of each row in the test.txt file.

----

===== Cut from a specific Byte to the End of the Input Stream =====

<code bash>
echo "cutting text from input" | cut -b 5-
</code>

The above cut command will cut the text from the fifth byte to the end of the string.

----

===== Cut from a specific Byte to the End of a File =====

<code bash>
cut -b 5- test.txt
</code>

This command will start cutting every one of the rows of the file test.txt from the fifth-byte position and finish only after each row ends.

The trailing hyphen (-) is mandatory for this operation.

----

===== Cut a Specified Amount of Bytes from the beginning of a string =====

<code bash>
echo "cutting text from input" | cut -b -5
</code>

This command will cut the first five bytes of the input string.

Remember to add the preceding hyphen(-) else the output will not be as expected.

----

===== Cut from the First Byte to a Specified Position from a File =====

<code bash>
cut -b -5 test.txt
</code>

The above command will cut just the first five bytes of each line from the file.

----

===== Cut Bytes in Alphabetical Order =====

<code bash>
cut -b 1-7 test.txt | sort
</code>

The output of the cut command is passed to the sort command for displaying the first seven bytes of each row alphabetically.

For alphabetical sorting, the sort command doesn’t require any options.

----

===== Cut Bytes in Reverse Order =====

<code bash>
cut -b 1-7 test.txt | sort -r
</code>

This cut command will cut the first 7 bytes from each row and will output them in the reverse order.

Look how the output of the cut command is being fed to the sort command using a pipe.

----