Differences

This shows you the differences between two versions of the page.

--- nas:qnap:configuration_files_used:etc_enclosure_n.conf [2021/09/15 20:50] – created peter
+++ nas:qnap:configuration_files_used:etc_enclosure_n.conf [2021/09/15 21:13] (current) – [Enclosure 0] peter
@@ Line 1: / Line 1: @@
 ====== NAS - QNAP - Configuration Files used - /etc/enclosure_n.conf ======
+===== /etc/enclosure_n.conf =====
+This appears to be where the Physical enclosure disks are defined.
+In my system, the following enclosures exist:
+  * **enclosure_0.conf**:  The primary physical NAS drive enclosure, which can hold up to 6 disks.
+  * **enclosure_1.conf**:  An external QNAP RAID expansion enclosure connected via a USB 3.2 Gen 1 cable.
+  * **enclosure_3.conf**:  An external QNAP RAID expansion enclosure connected via a USB 3.2 Gen 1 cable.
+  * **enclosure_33.conf**:  A generic enclosure ID for all external disks connected to the USB3 ports.
+----
+===== Enclosure 0 =====
+<code bash>
+cat /etc/enclosure_0.conf
+</code>
+returns:
+<code bash>
+[Index]
+pd_bitmap = 0x7f8
+pd_sysid_sg5 = 3
+pd_sysid_sdf = 3
+pd_sysid_sg4 = 4
+pd_sysid_sde = 4
+pd_sysid_sg7 = 5
+pd_sysid_sdh = 5
+pd_sysid_sg6 = 6
+pd_sysid_sdg = 6
+pd_sysid_sg1 = 7
+pd_sysid_sdb = 7
+pd_sysid_sg0 = 8
+pd_sysid_sda = 8
+pd_sysid_sg3 = 9
+pd_sysid_sdd = 9
+pd_sysid_sg2 = 10
+pd_sysid_sdc = 10
+[PhysicalDisk_3]
+port_id = 3
+att_phy_id = -1
+pd_sys_id = sg5
+enc_sys_id = root
+pd_sys_name = /dev/sdf
+pd_ctrl_name = /dev/sg5
+pd_bus_name = 12:0:0:0
+pd_driver_name = ahci
+wwn = 5000CCA263CA5081
+real_wwn = 5000CCA263CA5081
+type = 0
+form = 2
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6GRPDGY
+status = 0
+capabilities = 207191
+sector_size = 512
+capacity = 15628053168
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 9
+max_link_speed = 9
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_4]
+port_id = 4
+att_phy_id = -1
+pd_sys_id = sg4
+enc_sys_id = root
+pd_sys_name = /dev/sde
+pd_ctrl_name = /dev/sg4
+pd_bus_name = 11:0:0:0
+pd_driver_name = ahci
+wwn = 5000CCA263CA4160
+real_wwn = 5000CCA263CA4160
+type = 0
+form = 2
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6GRKBJY
+status = 0
+capabilities = 207191
+sector_size = 512
+capacity = 15628053168
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 9
+max_link_speed = 9
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_5]
+port_id = 5
+att_phy_id = -1
+pd_sys_id = sg7
+enc_sys_id = root
+pd_sys_name = /dev/sdh
+pd_ctrl_name = /dev/sg7
+pd_bus_name = 16:0:0:0
+pd_driver_name = ahci
+wwn = 5000CCA263CE6C51
+real_wwn = 5000CCA263CE6C51
+type = 0
+form = 2
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6H0RLDY
+status = 0
+capabilities = 207191
+sector_size = 512
+capacity = 15628053168
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 9
+max_link_speed = 9
+pd_max_link_speed = 0
+read_speed = 185.65 MB/sec
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_6]
+port_id = 6
+att_phy_id = -1
+pd_sys_id = sg6
+enc_sys_id = root
+pd_sys_name = /dev/sdg
+pd_ctrl_name = /dev/sg6
+pd_bus_name = 15:0:0:0
+pd_driver_name = ahci
+wwn = 5000CCA263CE8E0A
+real_wwn = 5000CCA263CE8E0A
+type = 0
+form = 2
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6H10KWY
+status = 0
+capabilities = 207191
+sector_size = 512
+capacity = 15628053168
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 9
+max_link_speed = 9
+pd_max_link_speed = 0
+read_speed = 180.30 MB/sec
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_7]
+port_id = 7
+att_phy_id = -1
+pd_sys_id = sg1
+enc_sys_id = root
+pd_sys_name = /dev/sdb
+pd_ctrl_name = /dev/sg1
+pd_bus_name = 4:0:0:0
+wwn = 5000CCA263CCB805
+real_wwn = 5000CCA263CCB805
+type = 0
+form = 2
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6GWZBEY
+status = 0
+capabilities = 207191
+sector_size = 512
+capacity = 15628053168
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 9
+max_link_speed = 9
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_8]
+port_id = 8
+att_phy_id = -1
+pd_sys_id = sg0
+enc_sys_id = root
+pd_sys_name = /dev/sda
+pd_ctrl_name = /dev/sg0
+pd_bus_name = 3:0:0:0
+wwn = 5000CCA263CC3C28
+real_wwn = 5000CCA263CC3C28
+type = 0
+form = 2
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6GVXBKY
+status = 0
+capabilities = 207191
+sector_size = 512
+capacity = 15628053168
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 9
+max_link_speed = 9
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_9]
+port_id = 9
+att_phy_id = -1
+pd_sys_id = sg3
+enc_sys_id = root
+pd_sys_name = /dev/sdd
+pd_ctrl_name = /dev/sg3
+pd_bus_name = 8:0:0:0
+wwn = 5000CCA261D3A3C4
+real_wwn = 5000CCA261D3A3C4
+type = 0
+form = 2
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = VJHD6AMX
+status = 0
+capabilities = 207191
+sector_size = 512
+capacity = 15628053168
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 9
+max_link_speed = 9
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_10]
+port_id = 10
+att_phy_id = -1
+pd_sys_id = sg2
+enc_sys_id = root
+pd_sys_name = /dev/sdc
+pd_ctrl_name = /dev/sg2
+pd_bus_name = 7:0:0:0
+wwn = 5000CCA263CD99CD
+real_wwn = 5000CCA263CD99CD
+type = 0
+form = 2
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6GYXHYY
+status = 0
+capabilities = 207191
+sector_size = 512
+capacity = 15628053168
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 9
+max_link_speed = 9
+pd_max_link_speed = 0
+read_speed = 208.07 kB/sec
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+</code>
+<WRAP info>
+**NOTE:**  This is the primary NAS unit.
+  * It has eight, 8TB WD-RED disks configured in RAID6.
+  * The NAS does support two m.2, which I currently have removed, which may indicate why the first port number is shown as **PhysicalDisk_3**.
+    * An assumption is that ports one and two would be used by the m.2 slots.
+</WRAP>
+-----
+===== Enclosure 1 =====
+<code bash>
+cat /etc/enclosure_1.conf
+</code>
+returns:
+<code bash>
+[VirtualDisk_1]
+hw_raid_disk_bitmap = 1e
+hw_raid_spare_bitmap = 0
+port_id = 101
+att_phy_id = -1
+pd_sys_id = sg10
+enc_sys_id = tr_5-2
+pd_sys_name = /dev/sdk
+pd_ctrl_name = /dev/sg10
+pd_bus_name = 19:0:0:0
+wwn = PQ2ZBGRPE2G347T5MKUJ
+real_wwn =
+type = 0
+form = 0
+vendor = QNAP
+model = TR-004
+serial_no = PQ2ZBGRPE2G347T5MKUJ
+status = 0
+capabilities = 524352
+sector_size = 512
+capacity = 46883930112
+revision =
+protocol_ver = 0
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = 160.18 MB/sec
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 0
+hw_raid_type = 5
+[Index]
+virtual_pd_bitmap = 0x2
+pd_sysid_sg10 = 101
+pd_sysid_sdk = 101
+pd_bitmap = 0x1e
+pd_sysid_sg10:0 = 1
+pd_sysid_sg10:1 = 2
+pd_sysid_sg10:2 = 3
+pd_sysid_sg10:3 = 4
+[PhysicalDisk_1]
+port_id = 1
+att_phy_id = -1
+pd_sys_id = sg10:0
+enc_sys_id = tr_5-2
+pd_sys_name = /dev/sg10:0
+pd_ctrl_name = /dev/sg10:0
+pd_bus_name =
+wwn = R6GYZ8RY
+real_wwn =
+type = 0
+form = 0
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6GYZ8RY
+status = 0
+capabilities = 65538
+sector_size = 512
+capacity = 15628042240
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_2]
+port_id = 2
+att_phy_id = -1
+pd_sys_id = sg10:1
+enc_sys_id = tr_5-2
+pd_sys_name = /dev/sg10:1
+pd_ctrl_name = /dev/sg10:1
+pd_bus_name =
+wwn = R6GZ2LBY
+real_wwn =
+type = 0
+form = 0
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6GZ2LBY
+status = 0
+capabilities = 65538
+sector_size = 512
+capacity = 15628042240
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_3]
+port_id = 3
+att_phy_id = -1
+pd_sys_id = sg10:2
+enc_sys_id = tr_5-2
+pd_sys_name = /dev/sg10:2
+pd_ctrl_name = /dev/sg10:2
+pd_bus_name =
+wwn = R6GZ55XY
+real_wwn =
+type = 0
+form = 0
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6GZ55XY
+status = 0
+capabilities = 65538
+sector_size = 512
+capacity = 15628042240
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_4]
+port_id = 4
+att_phy_id = -1
+pd_sys_id = sg10:3
+enc_sys_id = tr_5-2
+pd_sys_name = /dev/sg10:3
+pd_ctrl_name = /dev/sg10:3
+pd_bus_name =
+wwn = VAJB0YAL
+real_wwn =
+type = 0
+form = 0
+vendor = WDC
+model = WD80EFAX-68KNBN0
+serial_no = VAJB0YAL
+status = 0
+capabilities = 65538
+sector_size = 512
+capacity = 15628042240
+revision = 81.00A81
+protocol_ver = 589865
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+</code>
+<WRAP info>
+**NOTE:**  This is an external QNAP RAID expansion enclosure connected via a USB 3.2 Gen 1 cable.
+  * It has four, 8TB WD-RED disks configured in RAID5.
+  * There are dip switches on this expansion unit, allowing various configurations, and it is configured to be "managed" by the primary NAS.
+</WRAP>
+----
+===== Enclosure 3 =====
+<code bash>
+cat /etc/enclosure_3.conf
+</code>
+returns:
+<code bash>
+[VirtualDisk_1]
+hw_raid_disk_bitmap = 1e
+hw_raid_spare_bitmap = 0
+port_id = 101
+att_phy_id = -1
+pd_sys_id = sg8
+enc_sys_id = tr_5-1
+pd_sys_name = /dev/sdi
+pd_ctrl_name = /dev/sg8
+pd_bus_name = 17:0:0:0
+wwn = O1ZOXRGXKARXMLK43LSX
+real_wwn =
+type = 0
+form = 0
+vendor = QNAP
+model = TR-004
+serial_no = O1ZOXRGXKARXMLK43LSX
+status = 0
+capabilities = 524352
+sector_size = 512
+capacity = 46883930112
+revision =
+protocol_ver = 0
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = 160.86 MB/sec
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 0
+hw_raid_type = 5
+[Index]
+virtual_pd_bitmap = 0x2
+pd_sysid_sg8 = 101
+pd_sysid_sdi = 101
+pd_bitmap = 0x1e
+pd_sysid_sg8:0 = 1
+pd_sysid_sg8:1 = 2
+pd_sysid_sg8:2 = 3
+pd_sysid_sg8:3 = 4
+[PhysicalDisk_1]
+port_id = 1
+att_phy_id = -1
+pd_sys_id = sg8:0
+enc_sys_id = tr_5-1
+pd_sys_name = /dev/sg8:0
+pd_ctrl_name = /dev/sg8:0
+pd_bus_name =
+wwn = 7HKKB22F
+real_wwn =
+type = 0
+form = 0
+vendor = WDC
+model = WD80EFAX-68LHPN0
+serial_no = 7HKKB22F
+status = 0
+capabilities = 65538
+sector_size = 512
+capacity = 15628042240
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_2]
+port_id = 2
+att_phy_id = -1
+pd_sys_id = sg8:1
+enc_sys_id = tr_5-1
+pd_sys_name = /dev/sg8:1
+pd_ctrl_name = /dev/sg8:1
+pd_bus_name =
+wwn = 7HKKBJUF
+real_wwn =
+type = 0
+form = 0
+vendor = WDC
+model = WD80EFAX-68LHPN0
+serial_no = 7HKKBJUF
+status = 0
+capabilities = 65538
+sector_size = 512
+capacity = 15628042240
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_3]
+port_id = 3
+att_phy_id = -1
+pd_sys_id = sg8:2
+enc_sys_id = tr_5-1
+pd_sys_name = /dev/sg8:2
+pd_ctrl_name = /dev/sg8:2
+pd_bus_name =
+wwn = R6H0S6YY
+real_wwn =
+type = 0
+form = 0
+vendor = WDC
+model = WD80EFZX-68UW8N0
+serial_no = R6H0S6YY
+status = 0
+capabilities = 65538
+sector_size = 512
+capacity = 15628042240
+revision = 83.H0A83
+protocol_ver = 589865
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+[PhysicalDisk_4]
+port_id = 4
+att_phy_id = -1
+pd_sys_id = sg8:3
+enc_sys_id = tr_5-1
+pd_sys_name = /dev/sg8:3
+pd_ctrl_name = /dev/sg8:3
+pd_bus_name =
+wwn = VAHARY2L
+real_wwn =
+type = 0
+form = 0
+vendor = WDC
+model = WD80EFAX-68KNBN0
+serial_no = VAHARY2L
+status = 0
+capabilities = 65538
+sector_size = 512
+capacity = 15628042240
+revision = 81.00A81
+protocol_ver = 589865
+link_speed = 8
+max_link_speed = 8
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 5400
+</code>
+<WRAP info>
+**NOTE:**  This is another external QNAP RAID expansion enclosure connected via a USB 3.2 Gen 1 cable.
+  * It has four, 8TB WD-RED disks configured in RAID5.
+  * There are dip switches on this expansion unit, allowing various configurations, and it is configured to be "managed" by the primary NAS.
+</WRAP>
+----
+===== Enclosure 33 =====
+<code bash>
+cat /etc/enclosure_33.conf
+</code>
+returns:
+<code bash>
+[Index]
+pd_bitmap = 0x8
+pd_sysid_sg9 = 3
+pd_sysid_sdj = 3
+[PhysicalDisk_3]
+port_id = 3
+att_phy_id = -1
+pd_sys_id = sg9
+enc_sys_id = root_usb
+pd_sys_name = /dev/sdj
+pd_ctrl_name = /dev/sg9
+pd_bus_name = 18:0:0:0
+wwn = D067E516480EF480F618623A
+real_wwn =
+type = 2
+form = 0
+vendor = Kingston
+model = DataTraveler 3.0
+serial_no = D067E516480EF480F618623A
+status = 0
+capabilities = 0
+sector_size = 512
+capacity = 60437492
+revision =
+protocol_ver = 0
+link_speed = 4
+max_link_speed = 0
+pd_max_link_speed = 0
+read_speed = none
+read_iops = none
+write_speed = none
+write_iops = none
+rotation_speed = 0
+</code>
+<WRAP info>
+**NOTE:**  This is a USB stick, containing the most recent QNAP BIOS, which is currently plugged in due to the system having problems booting.
+  * Attempts were being made to update the BIOS, by pressing F11 at boot, but this never works.
+  * Probably not needed.
+</WRAP>
+----