Differences

This shows you the differences between two versions of the page.

--- apache:example_configuration_file [2016/07/10 14:15] – created peter
+++ apache:example_configuration_file [2023/07/17 11:10] (current) – removed peter
@@ Line 1: / Line 1: @@
-====== Apache - Example configuration file ======
-An example of a configuration file from an Apache version 1.3 webserver.  It should have examples of most things that are used like virtualhosting.
-<file bash /etc/apache2/domain.conf>
-##
-## httpd.conf -- Apache HTTP server configuration file
-##
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://www.apache.org/docs/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.
-#
-# After this file is processed, the server will look for and process
-# /usr/local/apache/conf/srm.conf and then /usr/local/apache/conf/access.conf
-# unless you have overridden these with ResourceConfig and/or
-# AccessConfig directives here.
-#
-# The configuration directives are grouped into three basic sections:
-#  1. Directives that control the operation of the Apache server process as a
-#     whole (the 'global environment').
-#  2. Directives that define the parameters of the 'main' or 'default' server,
-#     which responds to requests that aren't handled by a virtual host.
-#     These directives also provide default values for the settings
-#     of all virtual hosts.
-#  3. Settings for virtual hosts, which allow Web requests to be sent to
-#     different IP addresses or hostnames and have them handled by the
-#     same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
-# with ServerRoot set to "/usr/local/apache" will be interpreted by the
-# server as "/usr/local/apache/logs/foo.log".
-#
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-#
-# ServerType is either inetd, or standalone.  Inetd mode is only supported on
-# Unix platforms.
-#
-ServerType standalone
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE!  If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-ServerRoot "/usr/local/apache"
-#
-# The LockFile directive sets the path to the lockfile used when Apache
-# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
-# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
-# its default value. The main reason for changing it is if the logs
-# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
-# DISK. The PID of the main server process is automatically appended to
-# the filename.
-#
-#LockFile /usr/local/apache/logs/httpd.lock
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-PidFile /usr/local/apache/logs/httpd.pid
-#
-# ScoreBoardFile: File used to store internal server process information.
-# Not all architectures require this.  But if yours does (you'll know because
-# this file will be  created when you run Apache) then you *must* ensure that
-# no two invocations of Apache share the same scoreboard file.
-#
-ScoreBoardFile /usr/local/apache/logs/httpd.scoreboard
-#
-# In the standard configuration, the server will process httpd.conf (this
-# file, specified by the -f command line option), srm.conf, and access.conf
-# in that order.  The latter two files are now distributed empty, as it is
-# recommended that all directives be kept in a single file for simplicity.
-# The commented-out values below are the built-in defaults.  You can have the
-# server ignore these files altogether by using "/dev/null" (for Unix) or
-# "nul" (for Win32) for the arguments to the directives.
-#
-#ResourceConfig conf/srm.conf
-#AccessConfig conf/access.conf
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 15
-#
-# Server-pool size regulation.  Rather than making you guess how many
-# server processes you need, Apache dynamically adapts to the load it
-# sees --- that is, it tries to maintain enough server processes to
-# handle the current load, plus a few spare servers to handle transient
-# load spikes (e.g., multiple simultaneous requests from a single
-# Netscape browser).
-#
-# It does this by periodically checking how many servers are waiting
-# for a request.  If there are fewer than MinSpareServers, it creates
-# a new spare.  If there are more than MaxSpareServers, some of the
-# spares die off.  The default values are probably OK for most sites.
-#
-MinSpareServers 10
-MaxSpareServers 25
-#
-# Number of servers to start initially --- should be a reasonable ballpark
-# figure.
-#
-StartServers 10
-#
-# Limit on total number of servers running, i.e., limit on the number
-# of clients who can simultaneously connect --- if this limit is ever
-# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
-# It is intended mainly as a brake to keep a runaway server from taking
-# the system with it as it spirals down...
-#
-MaxClients 150
-#
-# MaxRequestsPerChild: the number of requests each child process is
-# allowed to process before the child dies.  The child will exit so
-# as to avoid problems after prolonged use when Apache (and maybe the
-# libraries it uses) leak memory or other resources.  On most systems, this
-# isn't really needed, but a few (such as Solaris) do have notable leaks
-# in the libraries. For these platforms, set to something like 10000
-# or so; a setting of 0 means unlimited.
-#
-# NOTE: This value does not include keepalive requests after the initial
-#       request per connection. For example, if a child process handles
-#       an initial request and 10 subsequent "keptalive" requests, it
-#       would only count as 1 request towards this limit.
-#
-MaxRequestsPerChild 0
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, in addition to the default. See also the <VirtualHost>
-# directive.
-#
-Listen 80
-#Listen 12.34.56.78:80
-#
-# BindAddress: You can support virtual hosts with this option. This directive
-# is used to tell the server which IP address to listen to. It can either
-# contain "*", an IP address, or a fully qualified Internet domain name.
-# See also the <VirtualHost> and Listen directives.
-#
-#BindAddress *
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Please read the file README.DSO in the Apache 1.3 distribution for more
-# details about the DSO mechanism and run `httpd -l' for the list of already
-# built-in (statically linked and thus always available) modules in your httpd
-# binary.
-#
-# Note: The order in which modules are loaded is important.  Don't change
-# the order below without expert advice.
-#
-# Example:
-# LoadModule foo_module libexec/mod_foo.so
-#
-#LoadModule php4_module        libexec/libphp4.so
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition.  These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-#
-# If your ServerType directive (set earlier in the 'Global Environment'
-# section) is set to "inetd", the next few directives don't have any
-# effect since their settings are defined by the inetd configuration.
-# Skip ahead to the ServerAdmin directive.
-#
-#
-# Port: The port to which the standalone server listens. For
-# ports < 1023, you will need httpd to be run as root initially.
-#
-Port 80
-##  SSL Support
-##
-##  When we also provide SSL we have to listen to the
-##  standard HTTP port (see above) and to the HTTPS port
-##
-<IfDefine SSL>
-Listen 443
-</IfDefine>
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-#  . On HPUX you may not be able to use shared memory as nobody, and the
-#    suggested workaround is to create a user www and use that user.
-#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-#  when the value of (unsigned)Group is above 60000;
-#  don't use Group nobody on these systems!
-#
-User apache
-Group apache
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.  This address appears on some server-generated pages, such
-# as error documents.
-#
-ServerAdmin webmaster@here.com
-#
-# ServerName allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e., use
-# "www" instead of the host's real name).
-#
-# Note: You cannot just invent host names and hope they work. The name you
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g., http://123.45.67.89/)
-# anyway, and this will make redirections work in a sensible way.
-#
-# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
-# machine always knows itself by this address. If you use Apache strictly for
-# local testing and development, you may use 127.0.0.1 as the server name.
-#
-ServerName www.here.com
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/var/www/html"
-#
-# Each directory to which Apache has access, can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories).
-#
-# First, we configure the "default" to be a very restrictive set of
-# permissions.
-#
-<Directory />
-    Options FollowSymLinks
-    AllowOverride None
-</Directory>
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/var/www/html">
-#
-# This may also be "None", "All", or any combination of "Indexes",
-# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
-    Options Includes FollowSymLinks MultiViews
-#
-# This controls which options the .htaccess files in directories can
-# override. Can also be "All", or any combination of "Options", "FileInfo",
-# "AuthConfig", and "Limit"
-#
-    AllowOverride All
-#
-# Controls who can get stuff from this server.
-#
-    Order allow,deny
-    Allow from all
-</Directory>
-#
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is received.
-#
-<IfModule mod_userdir.c>
-    UserDir public_html
-</IfModule>
-#
-# Control access to UserDir directories.  The following is an example
-# for a site where these directories are restricted to read-only.
-#
-<Directory /home/*/public_html>
-    AllowOverride All
-    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-#    <Limit GET POST OPTIONS PROPFIND>
-#        Order allow,deny
-#        Allow from all
-#    </Limit>
-#    <LimitExcept GET POST OPTIONS PROPFIND>
-#        Order deny,allow
-#        Deny from all
-#    </LimitExcept>
-</Directory>
-#
-# DirectoryIndex: Name of the file or files to use as a pre-written HTML
-# directory index.  Separate multiple entries with spaces.
-#
-<IfModule mod_dir.c>
-    DirectoryIndex index.html index.htm index.shtml default.htm default.html index.php
-</IfModule>
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information.
-#
-AccessFileName .htaccess
-#
-# The following lines prevent .htaccess files from being viewed by
-# Web clients.  Since .htaccess files often contain authorization
-# information, access is disallowed for security reasons.  Comment
-# these lines out if you want Web visitors to see the contents of
-# .htaccess files.  If you change the AccessFileName directive above,
-# be sure to make the corresponding changes here.
-#
-# Also, folks tend to use names such as .htpasswd for password
-# files, so this will protect those as well.
-#
-<Files ~ "^\.ht">
-    Order allow,deny
-    Deny from all
-</Files>
-#
-# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
-#
-#CacheNegotiatedDocs
-#
-# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a URL that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name.  With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible.  This
-# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
-#
-UseCanonicalName On
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-<IfModule mod_mime.c>
-    TypesConfig /usr/local/apache/conf/mime.types
-</IfModule>
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type.  The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-# mod_mime_magic is not part of the default server (you have to add
-# it yourself with a LoadModule [see the DSO paragraph in the 'Global
-# Environment' section], or recompile the server and include mod_mime_magic
-# as part of the configuration), so it's enclosed in an <IfModule> container.
-# This means that the MIMEMagicFile directive will only be processed if the
-# module is part of the server.
-#
-<IfModule mod_mime_magic.c>
-    MIMEMagicFile /usr/local/apache/conf/magic
-</IfModule>
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog /usr/local/apache/logs/error_log
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%h %l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here.  Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog /usr/local/apache/logs/access_log common
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog /usr/local/apache/logs/referer_log referer
-#CustomLog /usr/local/apache/logs/agent_log agent
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog /usr/local/apache/logs/access_log combined
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#
-ServerSignature On
-#This directive controls whether Server response header field which is
-#sent back to clients includes a description of the generic OS-type of the
-#server as well as information about compiled-in modules.
-#ServerTokens Prod[uctOnly] only available in versions later than 1.3.12
-#    Server sends (e.g.): Server: Apache
-#ServerTokens Min[imal]
-#    Server sends (e.g.): Server: Apache/1.3.0
-#ServerTokens OS
-#    Server sends (e.g.): Server: Apache/1.3.0 (Unix)
-#ServerTokens Full (or not specified)
-#    Server sends (e.g.): Server: Apache/1.3.0 (Unix) PHP/3.0 MyMod/1.2
-ServerTokens Prod
-# EBCDIC configuration:
-# (only for mainframes using the EBCDIC codeset, currently one of:
-# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
-# The following default configuration assumes that "text files"
-# are stored in EBCDIC (so that you can operate on them using the
-# normal POSIX tools like grep and sort) while "binary files" are
-# stored with identical octets as on an ASCII machine.
-#
-# The directives are evaluated in configuration file order, with
-# the EBCDICConvert directives applied before EBCDICConvertByType.
-#
-# If you want to have ASCII HTML documents and EBCDIC HTML documents
-# at the same time, you can use the file extension to force
-# conversion off for the ASCII documents:
-# > AddType       text/html .ahtml
-# > EBCDICConvert Off=InOut .ahtml
-#
-# EBCDICConvertByType  On=InOut text/* message/* multipart/*
-# EBCDICConvertByType  On=In    application/x-www-form-urlencoded
-# EBCDICConvertByType  On=InOut application/postscript model/vrml
-# EBCDICConvertByType Off=InOut */*
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is
-# Alias fakename realname
-#
-<IfModule mod_alias.c>
-    #
-    # Note that if you include a trailing / on fakename then the server will
-    # require it to be present in the URL.  So "/icons" isn't aliased in this
-    # example, only "/icons/".  If the fakename is slash-terminated, then the
-    # realname must also be slash terminated, and if the fakename omits the
-    # trailing slash, the realname must also omit it.
-    #
-    Alias /icons/ "/usr/local/apache/icons/"
-    Alias /icons/ "/var/www/icons/"
-    <Directory "/usr/local/apache/icons">
-        Options Indexes MultiViews
-        AllowOverride None
-        Order allow,deny
-        Allow from all
-    </Directory>
-    #
-    # ScriptAlias: This controls which directories contain server scripts.
-    # ScriptAliases are essentially the same as Aliases, except that
-    # documents in the realname directory are treated as applications and
-    # run by the server when requested rather than as documents sent to the client.
-    # The same rules about trailing "/" apply to ScriptAlias directives as to
-    # Alias.
-    #
-#    ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/"
-ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
-#
-# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
-# CGI directory exists, if you have that configured.
-#
-<Directory "/var/www/cgi-bin">
-    AllowOverride None
-    Options ExecCGI
-    Order allow,deny
-    Allow from all
-</Directory>
-    #
-    # "/usr/local/apache/cgi-bin" should be changed to whatever your ScriptAliased
-    # CGI directory exists, if you have that configured.
-    #
-#    <Directory "/usr/local/apache/cgi-bin">
-#        AllowOverride None
-#        Options None
-#        Order allow,deny
-#        Allow from all
-#    </Directory>
-</IfModule>
-# End of aliases.
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Format: Redirect old-URI new-URL
-#
-#
-# Directives controlling the display of server-generated directory listings.
-#
-<IfModule mod_autoindex.c>
-    #
-    # FancyIndexing is whether you want fancy directory indexing or standard
-    #
-    IndexOptions FancyIndexing
-    #
-    # AddIcon* directives tell the server which icon to show for different
-    # files or filename extensions.  These are only displayed for
-    # FancyIndexed directories.
-    #
-    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-    AddIconByType (TXT,/icons/text.gif) text/*
-    AddIconByType (IMG,/icons/image2.gif) image/*
-    AddIconByType (SND,/icons/sound2.gif) audio/*
-    AddIconByType (VID,/icons/movie.gif) video/*
-    AddIcon /icons/binary.gif .bin .exe
-    AddIcon /icons/binhex.gif .hqx
-    AddIcon /icons/tar.gif .tar
-    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-    AddIcon /icons/a.gif .ps .ai .eps
-    AddIcon /icons/layout.gif .html .shtml .htm .pdf
-    AddIcon /icons/text.gif .txt
-    AddIcon /icons/c.gif .c
-    AddIcon /icons/p.gif .pl .py
-    AddIcon /icons/f.gif .for
-    AddIcon /icons/dvi.gif .dvi
-    AddIcon /icons/uuencoded.gif .uu
-    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-    AddIcon /icons/tex.gif .tex
-    AddIcon /icons/bomb.gif core
-    AddIcon /icons/back.gif ..
-    AddIcon /icons/hand.right.gif README
-    AddIcon /icons/folder.gif ^^DIRECTORY^^
-    AddIcon /icons/blank.gif ^^BLANKICON^^
-    #
-    # DefaultIcon is which icon to show for files which do not have an icon
-    # explicitly set.
-    #
-    DefaultIcon /icons/unknown.gif
-    #
-    # AddDescription allows you to place a short description after a file in
-    # server-generated indexes.  These are only displayed for FancyIndexed
-    # directories.
-    # Format: AddDescription "description" filename
-    #
-    #AddDescription "GZIP compressed document" .gz
-    #AddDescription "tar archive" .tar
-    #AddDescription "GZIP compressed tar archive" .tgz
-    #
-    # ReadmeName is the name of the README file the server will look for by
-    # default, and append to directory listings.
-    #
-    # HeaderName is the name of a file which should be prepended to
-    # directory indexes.
-    #
-    # If MultiViews are amongst the Options in effect, the server will
-    # first look for name.html and include it if found.  If name.html
-    # doesn't exist, the server will then look for name.txt and include
-    # it as plaintext if found.
-    #
-    ReadmeName README
-    HeaderName HEADER
-    #
-    # IndexIgnore is a set of filenames which directory indexing should ignore
-    # and not include in the listing.  Shell-style wildcarding is permitted.
-    #
-    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-</IfModule>
-# End of indexing directives.
-#
-# Document types.
-#
-<IfModule mod_mime.c>
-    #
-    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
-    # information on the fly. Note: Not all browsers support this.
-    # Despite the name similarity, the following Add* directives have nothing
-    # to do with the FancyIndexing customization directives above.
-    #
-    AddEncoding x-compress Z
-    AddEncoding x-gzip gz tgz
-    #
-    # AddLanguage allows you to specify the language of a document. You can
-    # then use content negotiation to give a browser a file in a language
-    # it can understand.
-    #
-    # Note 1: The suffix does not have to be the same as the language
-    # keyword --- those with documents in Polish (whose net-standard
-    # language code is pl) may wish to use "AddLanguage pl .po" to
-    # avoid the ambiguity with the common suffix for perl scripts.
-    #
-    # Note 2: The example entries below illustrate that in quite
-    # some cases the two character 'Language' abbreviation is not
-    # identical to the two character 'Country' code for its country,
-    # E.g. 'Danmark/dk' versus 'Danish/da'.
-    #
-    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
-    # specifier. But there is 'work in progress' to fix this and get
-    # the reference data for rfc1766 cleaned up.
-    #
-    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
-    # French (fr) - German (de) - Greek-Modern (el)
-    # Italian (it) - Korean (kr) - Norwegian (no)
-    # Portugese (pt) - Luxembourgeois* (ltz)
-    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
-    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
-    # Russian (ru)
-    #
-    AddLanguage da .dk
-    AddLanguage nl .nl
-    AddLanguage en .en
-    AddLanguage et .ee
-    AddLanguage fr .fr
-    AddLanguage de .de
-    AddLanguage el .el
-    AddLanguage he .he
-    AddCharset ISO-8859-8 .iso8859-8
-    AddLanguage it .it
-    AddLanguage ja .ja
-    AddCharset ISO-2022-JP .jis
-    AddLanguage kr .kr
-    AddCharset ISO-2022-KR .iso-kr
-    AddLanguage no .no
-    AddLanguage pl .po
-    AddCharset ISO-8859-2 .iso-pl
-    AddLanguage pt .pt
-    AddLanguage pt-br .pt-br
-    AddLanguage ltz .lu
-    AddLanguage ca .ca
-    AddLanguage es .es
-    AddLanguage sv .se
-    AddLanguage cz .cz
-    AddLanguage ru .ru
-    AddLanguage zh-tw .tw
-    AddLanguage tw .tw
-    AddCharset Big5         .Big5    .big5
-    AddCharset WINDOWS-1251 .cp-1251
-    AddCharset CP866        .cp866
-    AddCharset ISO-8859-5   .iso-ru
-    AddCharset KOI8-R       .koi8-r
-    AddCharset UCS-2        .ucs2
-    AddCharset UCS-4        .ucs4
-    AddCharset UTF-8        .utf8
-    # LanguagePriority allows you to give precedence to some languages
-    # in case of a tie during content negotiation.
-    #
-    # Just list the languages in decreasing order of preference. We have
-    # more or less alphabetized them here. You probably want to change this.
-    #
-    <IfModule mod_negotiation.c>
-        LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
-    </IfModule>
-    #
-    # AddType allows you to tweak mime.types without actually editing it, or to
-    # make certain files to be certain types.
-    #
-    # For example, the PHP 3.x module (not part of the Apache distribution - see    # http://www.php.net) will typically use:
-    #
-    #AddType application/x-httpd-php3 .php3
-    #AddType application/x-httpd-php3-source .phps
-    #
-    # And for PHP 4.x, use:
-    #
-    AddType application/x-httpd-php .php
-    #AddType application/x-httpd-php-source .phps
-    AddType application/x-tar .tgz
-    AddType application/x-ica .ica
-    #
-    # AddHandler allows you to map certain file extensions to "handlers",
-    # actions unrelated to filetype. These can be either built into the server
-    # or added with the Action command (see below)
-    #
-    # If you want to use server side includes, or CGI outside
-    # ScriptAliased directories, uncomment the following lines.
-    #
-    # To use CGI scripts:
-    #
-    #AddHandler cgi-script .cgi
-    #
-    # To use server-parsed HTML files
-    #
-    AddType text/html .shtml
-    AddHandler server-parsed .shtml
-    #
-    # Uncomment the following line to enable Apache's send-asis HTTP file
-    # feature
-    #
-    #AddHandler send-as-is asis
-    #
-    # If you wish to use server-parsed imagemap files, use
-    #
-    AddHandler imap-file map
-    #
-    # To enable type maps, you might want to use
-    #
-    #AddHandler type-map var
-</IfModule>
-# End of document types.
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-#
-# MetaDir: specifies the name of the directory in which Apache can find
-# meta information files. These files contain additional HTTP headers
-# to include when sending the document
-#
-#MetaDir .web
-#
-# MetaSuffix: specifies the file name suffix for the file containing the
-# meta information.
-#
-#MetaSuffix .meta
-#
-# Customizable error response (Apache style)
-#  these come in three flavors
-#
-#    1) plain text
-#ErrorDocument 500 "The server made a boo boo.
-#  n.b.  the single leading (") marks it as text, it does not get output
-#
-#    2) local redirects
-#ErrorDocument 404 /missing.html
-#  to redirect to local URL /missing.html
-#ErrorDocument 404 /cgi-bin/missing_handler.pl
-#  N.B.: You can redirect to a script or a document using server-side-includes.
-#
-#    3) external redirects
-#ErrorDocument 402 http://some.other_server.com/subscription_info.html
-#  N.B.: Many of the environment variables associated with the original
-#  request will *not* be available to such a script.
-#
-# Customize behaviour based on the browser
-#
-<IfModule mod_setenvif.c>
-    #
-    # The following directives modify normal HTTP response behavior.
-    # The first directive disables keepalive for Netscape 2.x and browsers that
-    # spoof it. There are known problems with these browser implementations.
-    # The second directive is for Microsoft Internet Explorer 4.0b2
-    # which has a broken HTTP/1.1 implementation and does not properly
-    # support keepalive when it is used on 301 or 302 (redirect) responses.
-    #
-    BrowserMatch "Mozilla/2" nokeepalive
-    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-    #
-    # The following directive disables HTTP/1.1 responses to browsers which
-    # are in violation of the HTTP/1.0 spec by not being able to grok a
-    # basic 1.1 response.
-    #
-    BrowserMatch "RealPlayer 4\.0" force-response-1.0
-    BrowserMatch "Java/1\.0" force-response-1.0
-    BrowserMatch "JDK/1\.0" force-response-1.0
-</IfModule>
-# End of browser customization directives
-#
-# Allow server status reports, with the URL of http://servername/server-status
-# Change the ".your_domain.com" to match your domain to enable.
-#
-#<Location /server-status>
-#    SetHandler server-status
-#    Order deny,allow
-#    Deny from all
-#    Allow from .your_domain.com
-#</Location>
-#
-# Allow remote server configuration reports, with the URL of
-# http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".your_domain.com" to match your domain to enable.
-#
-#<Location /server-info>
-#    SetHandler server-info
-#    Order deny,allow
-#    Deny from all
-#    Allow from .your_domain.com
-#</Location>
-#
-# There have been reports of people trying to abuse an old bug from pre-1.1
-# days.  This bug involved a CGI script distributed as a part of Apache.
-# By uncommenting these lines you can redirect these attacks to a logging
-# script on phf.apache.org.  Or, you can record them yourself, using the script
-# support/phf_abuse_log.cgi.
-#
-#<Location /cgi-bin/phf*>
-#    Deny from all
-#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
-#</Location>
-#
-# Proxy Server directives. Uncomment the following lines to
-# enable the proxy server:
-#
-#<IfModule mod_proxy.c>
-#    ProxyRequests On
-#    <Directory proxy:*>
-#        Order deny,allow
-#        Deny from all
-#        Allow from .your_domain.com
-#    </Directory>
-    #
-    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
-    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
-    # Set to one of: Off | On | Full | Block
-    #
-#    ProxyVia On
-    #
-    # To enable the cache as well, edit and uncomment the following lines:
-    # (no cacheing without CacheRoot)
-    #
-#    CacheRoot "/usr/local/apache/proxy"
-#    CacheSize 5
-#    CacheGcInterval 4
-#    CacheMaxExpire 24
-#    CacheLastModifiedFactor 0.1
-#    CacheDefaultExpire 1
-#    NoCache a_domain.com another_domain.edu joes.garage_sale.com
-#</IfModule>
-# End of proxy directives.
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *
-NameVirtualHost 192.168.0.100:80
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *>
-#    ServerAdmin webmaster@dummy-host.example.com
-#    DocumentRoot /www/docs/dummy-host.example.com
-#    ServerName dummy-host.example.com
-#    ErrorLog logs/dummy-host.example.com-error_log
-#    CustomLog logs/dummy-host.example.com-access_log common
-#</VirtualHost>
-<VirtualHost 192.168.0.100>
-    ServerAdmin webmaster@domain1.com
-    DocumentRoot /var/www/html/domain1.com
-    ServerName www.domain1.com
-    ErrorLog /var/log/httpd/domain1.com-error_log
-    CustomLog /var/log/httpd/domain1.com-access_log combined
-</VirtualHost>
-<IfDefine SSL>
-##
-## SSL Virtual Host Context
-##
-<VirtualHost 222.222.222.222:443>
-ServerAdmin webmaster@domain1.com
-    DocumentRoot /var/www/html/domain1.com
-    ServerName www.domain1.com
-    ErrorLog /var/log/httpd/domain1.com-error_log
-    CustomLog /var/log/httpd/domain1.com-access_log combined
-    SSLEngine on
-    #next line is a fix for page not found error with php
-    SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
-    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
-    SSLCertificateFile /usr/local/apache/conf/ssl.crt/www.domain1.com.crt
-    SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/www.domain1.com.key
-</VirtualHost>
-</IfDefine>
-<VirtualHost 222.222.222.222>
-    ServerAdmin webmaster@domain2.com
-    DocumentRoot /var/www/html/domain2.com/
-    ServerName domain2.com
-    ServerAlias www.domain2.com domain2-variant.com www.domain2-variant.com
-    ErrorLog /var/log/httpd/domain2.com-access_log combined
-    CustomLog /var/log/httpd/domain2.com-access_log combined
-</VirtualHost>
-</file>